Jiangsu Rooe Medical Technology Co., Ltd.  

Product Name: Ea-17 Coronavirus Pneumonia Intensive Hospital Medical Safety Disposable Surgical Protective Isolation Clothing Equipment Model NO.: EA-17 Group: Adult Quality Guarantee Period: Two Years Ethylene Oxide Sterilization: Ethylene Oxide Sterilization Certification: CE, FDA Material: Non-woven Fabric Type: Disposable Isolation Gown and Cap OEM: Available Certficates: ISO,Ce Trademark: WANROOEMED Transport Package: Export Carton Package Specification: 200CM Origin: Jiangsu, China (Mainland) HS Code: 94029000 Product Description EA-17 Coronavirus Pneumonia Intensive Hospital Medical Safety Disposable Surgical Protective Isolation Clothing EquipmentProtective clothing suitable for contact with blood, body fluids, secretions, particulates in the air, etc. of potentially infectious patients.This product blocks 99% of the virus and targets Ebola and New Coronavirus.The protective clothing is composed of a hooded top and pants, and elastic cuffs are used for the cuffs, ankles, hat face and waist. The main material is polyester high-density woven fabric, and the structure is divided into two types: one-piece and two-piece.Material:Non-woven Fabric/PP+PEFeature:1.Good BreathabilityUsing high-quality fabric, one-way breathable, highly effective antibacterial, can quickly restore the internal heat.2.Prevent Fine ParticlesCan filter fine particles, dust, etc.Effective Sound InsulationEffectively isolate various external liquids, filter volatile gases, and avoid direct contact.3.Hooded DesignHooded head design and elastic design at the mouth, effectively isolate dust and microorganisms4.Zipper DesignEasy to put on and take off5.Elastic CuffsFreely retractable, effective barrier, easier work.6.Elastic Waist DesignElastic waist design makes it more fit and meets the needs of different body shapes.Instructions for use1. Open the protective clothing, check whether it is damaged, and unzip it to a suitable location;2. Hold the protective clothing coveralls and sleeves with your left and right hands, and at the same time grasp the opening of the protective clothing waist zipper to avoid contact with the ground; wear the lower limbs first, then the upper limbs, and then wear the coveralls on the head to tighten The rubber band manually puts the hat tightly against the head. After pulling the zipper all the way to the top, the neckband is glued. Finally, the rubber bands at the cuffs and ankles are manually tightened to ensure tightness;3. When taking off the protective clothing, first open the neckline sticker, pull the medical protective clothing zipper to the end, loosen and tighten the rubber bands, and pull up the conjoined cap with both hands, so that the cap is off the head; grasp the shoulders on both sides of the medical protective clothing , The protective clothing is lowered below the shoulders. First, hold the edge of the contaminated surface (outside) of the right-handed medical glove with your left hand, take off the glove (with the inside facing outward), and hold it in your hand. Then enter the inside of the left-handed glove with your right hand, and take off the medical glove (inside-out). With both hands coming out of the sleeves, grasp the inner side of the medical protective clothing with both hands, and roll off from inside to outside and from top to bottom until all are taken off.4. After taking off the protective clothing, roll the protective clothing into a covered trash can and discard it.Company Information: